Mooring Tails
8 Strand UniFlex-S Mooring Tails
Our own brand UniFlex-S mooring tails designed to reduce dynamic loads on primary mooring lines, to provide elasticity in the mooring system. This elasticity provides safer operation, and protection from surging and shock loading, especially in exposed mooring berth, also provide long-terms performance benefits and longer service life. Mooring tails are typically supplied in lenght 11mtr with 1.8 and 0.6mtr covered eyes. Made from high tenacity polypropylene & polyester composite fibers materials. As Per OCIMF guidelines, mooring tails have a 25% higher MBS and nylon (or polyamide) mooring tails should have a 37% higher MBs than the primary mooring line
| Diameter | Circ Size | Weight | Length | Breaking Load | |
| mm | inches | inches | Kg/unit | Mtr/unit | KGF |
| 64mm | 2 5/8” | 8 | 42.00 | 11.00 | 91000 |
| 72mm | 2 7/8” | 9 | 50.00 | 11.00 | 125000 |
| 80mm | 3 1/4” | 10 | 62.00 | 11.00 | 126700 |
|
Features |
Special characteristics |
|
| CONSTRUCTION | Highest strength of the convertional mooring ropes |
8—STRAND |
| UV RESISTANCE | No Loss of strength when wet |
GOOD |
| ABRASION RESISTANCE | Low weight |
VERY GOOD |
| CHEMICAL RESISTANCE | Easy handling |
VERY GOOD |
| COLOR | Slow elongation |
WHITE |
| WATER ABSORPTION | Low snap back effect |
APRX 165oC/265oC |
| FLOATING | YES | |
Certificates: DNV/GL or ABS
OCIMF Approved